Compared with open loop type: location precision, not out of step, can remain in a fixed position, or even by external factors under the influence of mechanical vibration, will still be able to return to the original position. Motor torque is 100%, according to the change of the load current real-time adjustment, to the traditional step USES the maximum current is needed to cover all load range. Compared with brushless dc step: don't need to adjust power (According to the load size adjusting current size), static balance (After reaching the location specified maintain consistent, unlike brushless step is a dynamic balance)Through independent location information of DSP quick feedback control, benefit from the rapid pause advantages of step, the reciprocating movement of the sustained, rapid and able to perform. 我- - - - - -Drives are based on Arm core M4 technology, through the pulse direction and Modbus or Canbus control mode, in precision, smooth type and realized the breakthrough in such aspects as noise suppression,This technology even in terms of the world, also will not have)。 Through the master controller to control the drive, to adapt to the multi-axis control system (Maximum 127 axis), built-in high-end ensure multi-axis synchronization motion control module, and reduce the load the main controller. the main products: stepper motor, brushless motor, servo motor, stepping motor drive, brake motor, linear motor and other kinds of models of the stepper motor, welcome to inquire. Telephone:
