Angle grinder may be a lot of people can use, it is a use of glass fiber reinforced plastic portable electric tools for cutting and polishing, brush is mainly used for cutting, grinding and grinding metal and stone, etc. Below is for us the Angle mill's safe operating procedures and maintenance methods. Grinder safety operating rules, protect an eye mask. And turn on the switch, after waiting for grinding wheel rotational stability to work. The hair first, long hair, the worker must be tied up. Not towards people, cutting direction. , continuous work in half an hour to stop for 15 minutes. Small parts, not caught with the hand diagonal grinding machine for processing. , after the completion of the work conscientiously clean work environment. Specific brands and models of grinder is different, please be sure to check before the operation manual. Angle grinder maintenance methods lead to grinder leakage fault common are: rotor stator leakage, leakage, brush seat leakage (The Angle of the metal shell mill)And internal wire breakage. , demolition of brush, can judge the stator, coating thickness gauge principle brush and internal wires for leakage. , disconnect the cables of the stator and brush holder, can judge brush bases for leakage. , independent measuring rotor for leakage. , rotor and brush seat leakage can only be replaced, the stator can rewind or replacement. First apart procuratorial connection line skin have no damaged, coating thickness gauge prices with the multimeter to the chassis can be detected, and then on the rotor measuring, rotor leakage or stator leakage can be detected, the rotor leakage can be replaced, the stator leakage and see if it is carbon brush powder and other sundry product to too much and leakage, clean again measurement, or leakage is the stator winding insulation is not good, see if windings to shell or damp, not only can rewind. The above is to introduce the relevant knowledge of safe operating procedures and maintenance method. Angle grinder are common in modern life, suitable for cutting, grinding and brush grinding metal and stone, but my homework not water, when cutting stone material also must use the guide plate. Everyone in the use of Angle grinding machine must keep hands operation, completes the protective measures.
