Stepper motor has a technical parameters: no-load start frequency, the stepper motor under no-load condition can normal boot pulse frequency, if the pulse frequency is higher than the value, the motor does not start properly, may be lost or blocked. In the load cases, start frequency should be lower. If you want to make the motor to achieve high-speed rotation, the pulse frequency should be to accelerate the process, namely the start frequency is low, and then in a certain high frequency acceleration to want (Motor speed from low speed to high speed)。 The acceleration of the acceleration of PLC control for the slope, commonly used time from 100 to 500 milliseconds, the acceleration of single chip microcomputer process can make it curve, the curve speed more smoothly, the same conditions than the slope reach higher top speed. Stepper motor from high-speed to stop also must have a slow process, otherwise it will lead to overshoot stepper motor, and suddenly the wager transfer damage step motor drive product information: stepper motor, brushless motor, servo motor, stepping motor drive, brake motor, linear motor and other kinds of models of the stepper motor, welcome to inquire. Telephone:
