Gear motor under the following simple introduce the installation of planetary gear motor and lubrication methods: one, 1 installation, machine of decelerate of planet of general slope should be installed in a horizontal plane shall not exceed 10 & deg; 2, input shaft and output shaft is connected to power and form a complete set of machinery, such as coupling, the axis and axis strict to, can not have different heart phenomenon, using the v belt and the chain shoulds not be too tight or too loose. 3, whether to tighten the mounting screw should be inspected periodically and fixation, gasket as far as possible choose spring washers. 4, installation base should be solid and reliable, and can not have the vibration, loose phenomenon, fixed screw should be in accordance with the relevant provisions, to choose. Second, the lubrication 1, the first use of 50 hours, new oil should be replaced immediately, and the body's internal smeary clean, after once every three months to replace. 2, please as soon as possible to replace oil seal oil. 3, the machine of decelerate of planet of general lubrication oil pool, attention must add good medium voltage before use gear oil N220 or N320 to specified location (In low gear, 20 -30mm)And regularly added.
