mechanical and electrical company introduce specifications of the steps of: (choose servo motor controller1)According to the load moment of inertia moment of inertia and the motor controller to select the appropriate false selected motor controller specification. (2)Based on load weight, configuration mode, friction coefficient, the efficiency is to calculate the load torque. (3)Combined with the primary mechanical inertia and load inertia, calculate the acceleration and deceleration torque torque. (4)Accordance with the requirements of operating conditions to choose appropriate load formula of moment of inertia, calculates the load moment of inertia of the organization. (5)On the basis of load torque, acceleration, deceleration torque and torque holding torque, calculate the instantaneous torque in a row. (6)Requirements clear load mechanism motion: add/deceleration speed, movement speed, the weight of the institution, institutional forms of exercise, etc. (7)Primary electromechanical maximum output torque must be greater than the accelerating torque + load torque; If do not conform to the conditions, must choose other model calculation verification until it meets the requirements. (8)Primary rated torque of the servo motor controller must be greater than the instantaneous torque in a row, if is not in conformity with the conditions, must use the model is proved until it meets the requirements. http://www。 tcmotor。 Com foshan electrical and mechanical equipment co. , LTD. , brushless motor controller, brushless dc motor controller, dc servo motor controller, planetary reducer, brushless drive, electrical and mechanical, foshan electrical and mechanical equipment co. , LTD