Electric tools is refers with the hand grip, with small power motor or electromagnet for the power, through the transmission mechanism to drive the work head tool. Below to introduce the electric tools use pay attention to safety matters: and keep the workplace clean. Don't clutter the workplace and work surface using power tools. , pay attention to the workplace environment. Do not use power tools in the dark wet place. Electric tools do not get wet in the rain. Not in combustible liquid, or gas exists in common use power tools. , do not let children near and idle people to enter the workplace should be banned. Do not let the people close to or touching tools or power wires. , the collection tools. Electric tools need not when, should collect in a dry, and it out of the reach of children, should be locked. And maintain suitable feed speed and pressure. Make tool operation more safe and durable. , choose the right tools and accessories. According to the specified range of application operation, do not conform to, for the use of overload processing. , pay attention to clothes. Do not wear loose clothing and accessories, in order to avoid the tools were caught told rotates. Time in the outdoor wear rubber gloves and antiskid industrial safety shoes. Long hair operators, should be qualified protection cap. , the use of safety glasses. Plane crumbs and more dust, should wear a face mask. And don't pedal wires. Do not drag the wire migration tool, or pull wire pull out the plug, etc. Must also keep wire touch the hot objects and metal sharp edge or wet grease. , fixed artifacts. Use clamp fixed to the cutting of the workpiece, the safer than hand workpiece machining. , at work, must maintain the appropriate position, must stand, do not stretch out his hand over the tools get content and processing. , pay attention to maintenance tools. Tool must always remain sharp to get a good processing performance and operation safety. In accordance with the provisions of lubrication and replacement parts. Regularly check the wires, if found to have damaged should be immediately to the professional repair center for repair. Extended by electrical conductor if there is any breakage, shall be replaced. Handle to dry clean, non-stick oil. , tools in don't take things personally, or for maintenance, in fixture, cutting tools, be sure to unplug the power plug. , remember to remove adjustment using hand tools and plate, etc. Before open the switch turning machine, must check tool of adjusting tools and fixed with a wrench, etc have completely taken, must form the habit. , to prevent accidental activation. Insert the plug into the power socket before the tool must be checked for switch is closed. After electrify, fingers not constantly press on the switch. , outdoor use, extend through wires. When households use tools, be sure to use the extension of outdoor special wires. And have to stay awake at work. Attentive work pay attention to the workpiece and tool. Should not be used tool when tired. , check the damaged parts. Before using the tool, the tool must be carefully checked fender or other part whether have damage, must check whether the damaged detailed tool will affect the normal function. Check whether all removable parts in the correct position, must be fixed part is fixed, etc. , check these parts may affect the normal operation. Fender or other parts damage, if any, should be the past &present repair or replacement, please. Tool switch if there is any problem, should be replaced the specialized service center, please, do not reluctant to switch electricity fed switch to start the tool. And avoid electric shock. At work, the body shall not come into contact with the ground metal body, such as iron pipe, heat sink, refrigerator, etc. And replacement parts. Repair, replacement parts, please must be used as prescribed by the original factory parts and replaced by professional repair center.
