Stepper motor stepper motor with its features of the product is widely used in various kinds of automation equipment. Of course, the organization is also applicable to the stepper motor is numerous, han debao motor as below you enumerate several more representative organization. (1) belt due to belt belongs to the low stiffness, susceptible to the influence of the inertial vibration. If the motor selection affects the positioning time of equipment. Such as servo motor end face such organizations need to spend time setting. And stepping motor as a result of instruction has the very high responsiveness, can quickly end positioning and rely on abundant force suppress vibration. Not only can end of positioning, also won't present on time delay. So many have experienced engineers in the use of belt instead of ball screw self-abnegation, transmission device, will choose stepper motor. (2) the pictures check since stepping electric group built simple processing equipment, with the excitation of the stator and accurate with small tooth rotor to attract each other, between stops can continue to adhere to the force. So the picture not affected by the vibration check processing equipment often use the stepper motor. (3) substrate handling distribution equipment due to the response of the stepper motor is extremely high, there will be no procrastination attack, so more than one motor is suitable for synchronous operation use. For example, install the motor separation to article 2 of the conveyor belt, clamping substrate for handling. (4) due to the will load with the rotation of the CAM CAM organization change, if the use of servo motor, on the whole time adjust the rotor position, too sensitive for the servo drive will be difficult to perfect. And step motor as the same speed with constant torque, without any adjustments, the use is very concise, so in the case of using CAM, recommend using stepper motor.
