Geared motor installation and maintenance: 1, before use, please first confirm the slow step motor appearance is broken? If there is a leak phenomenon? 2, please first confirm the slow step motor using the voltage. Voltage instability can be mounted to the regulator. 3, please confirm buy first deceleration stepper motor specifications and design specifications match? 4, please make sure the fixed frame, in order to avoid running loose when driving. Such as accessories, need to do in accordance with the provisions of the relevant installation. 6, step motor reducer, the lubrication has put butter in the body and 12000 hours without changing lubricating oil. 7, deceleration stepper motor drive is running, the rated current shall not exceed the motor nameplate marking current value. 8, please pay attention to the surrounding temperature, humidity, ph, etc. 9, to adapt to the environment for -10 ~ + 40 degrees, humidity below 90%, indoor at an altitude of 1000 meters. 10, if not in accordance with the right way to installation, maintenance or operation, is likely to be slow step motor serious damage. 11, repair or remove completely discount should be confirmed when the external power source from the slow step motor. 12, safety protection device is installed, to ensure the absolute safety operation. 13, motor need to ground wire, please refer to the distribution related laws and regulations. 14, please confirm all parts and transmission parts fixed installation is correct, again start to slow down the stepper motor. 15, if slow step motor with frequency converter for low speed transmission, need to be equipped with independent auxiliary cooling fan. 16, single phase within the capacitor after slow step motor power still remain part of the charge, please first discharge or terminals grounded. 17, motor vertical installation, please inform me first four macro motor technical engineers. the main products: stepper motor, brushless motor, servo motor, stepping motor drive, brake motor, linear motor and other kinds of models of the stepper motor, welcome to inquire. Telephone:
